Muratec F-98 03Box NameUpper Muratec America, 03Box NameLower, 03Sub-Address No 123456

7 The machine now is prompting you for a name for this F-Code box. The LCD shows:

03:Box Name:Upper	or	03:Box Name:Upper
_		Muratec America_

If you do not want to enter or change this F-Code box’s name, skip to step 9. If you do want to enter or change this F-Code box’s name, proceed to step 8.

8 An F-Code box’s name may be up to 16 characters in length. You enter the name the same way you entered your fax name during EasyStart. We’ll review the process here. (If you’re changing a previously entered name, see the note at the end of this step.)

Important: As in EasyStart, you enter letters and other non-numeric char- acters through the one-touch keys.

03:Box Name:Upper

_

The word “Upper” means the machine is currently set for entering only upper-case letters. If you press R, the machine will see it as an R (not an r).

To change it so that pressing a one-touch key will produce a lower-case letter rather than an upper-case letter, press U2/abc. The display will change to:

03:Box Name:Lower

_

This means pressing one-touch keys will enter lower-case letters. For exam- ple, pressing R, will produce an r (not an R) on the display.

To switch back for upper-case entries, press U1/ABC.

To enter space, punctuation and symbols, press U3/SYMBOL. This lets you enter the blue characters shown on the one-touch keypad.

To use the CODE function to enter a wide variety of characters, please review the explanation on page 2.3. Most of the time, you will probably find the ABC, abc and SYMBOL keys to be sufficient.

Note: If you make a mistake or want to erase characters entered in a previ- ous setting, press CANCEL to erase leftward. Or, if you want to change just one character in the name, press to move the cursor leftward, or to move it rightward, to that character and press CANCEL to erase it. Then re-enter until the name is just as you want it.

Beyond the basics

9 Press ENTER to save the box’s name and continue. The LCD shows:

03:Sub-Address No.	or	03:Sub-Address No.
_		123456_

The fax machine now asks for this F-Code box’s sub-address. This is the essential ITU-T-standard, all-numerical identifier which you must enter in order to communicate with any remote F-Code compatible fax.

If you do not wish to change an existing sub-address, skip to step 11. If you do wish to enter or change the sub-address, proceed to step 10.

10 Use the numeric keypad to enter the sub-address to identify this F-Code box. The sub-address can be up to 20 characters in length and include any combi- nation of numbers and the * and # characters (but no other non-numerical characters). (If you’re changing a previously entered sub-address, see the note at the end of this step.)

03:Sub-Address No. 654321_

Note: The sub-address must be unique to this F-Code box. No other F-Code box in this fax machine can have the same sub-address.

Note: If you make a mistake or want to erase characters in a previous set- ting, press CANCEL to erase leftward. Or if you want to change just one character in the number, press to move the cursor leftward, or to move it rightward, to that character and press CANCEL to erase it. Then re-enter until the number is just as you want it.

11 Press ENTER to save the sub-address.

Note: If you entered a sub-address already being used by another F-Code box, the machine will beep and briefly display the following:

03:Sub-Address No. Sub-Address In Use

The machine now returns you to step 10. Please enter a different number for your F-Code box’s sub-address.

12 Next, the machine asks for your F-Code box’s password. This is the password for ITU-T-compatible F-Code fax transactions. The LCD shows:

03:Password	or	03:Password
_		123456789*#_

Note: You don’t need to have a password for the F-Code box. However, using a password will make your F-Code communication much more secure.

2.29