Muratec F-98 Setting the transmission confirmation stamp, Setting the language

Setting the transmission confirmation stamp

You can set your fax machine so that it will automatically place a small stamp mark on the front of each original document that it successfully scans.

Important: Be sure that this feature is turned off if you are sending original docu- ments you don’t want the fax to stamp.

1 Press PROGRAM, J, 1, 9, ENTER. The LCD shows your fax’s current setting:

Stamp:Off

Program/Enter

If the setting you see is acceptable, skip to step 3.

Otherwise, proceed to step 2.

2 To change the setting, press PROGRAM once or twice until your chosen setting appears. In this example, we’ve chosen On.

Stamp:On

Program/Enter

3 Press ENTER to save the setting.

Setting the language

While English is the language in which your machine initially is set to display mes- sages and print reports, you can set it to “speak” French or Spanish, too! As you give the order for the machine to change languages, it “rolls” from English to French to Spanish and then back to English.

To make the change from one language to the next, press PROGRAM, #.

¿Qué es? — or, What is it?

If, after making a language change, you’re not sure which language is showing, press PROGRAM once and decide based on what results on the LCD:

A Num. Une-Touche	is French.
Program./Val.
A Núm. Una-Tecla	is Spanish.
Program./Sel.

If the language you see is the one you want, press STOP to return to standby mode.

If you want to change languages, press STOP to return to standby mode and then press PROGRAM, # again to go to the next language in the cycle.

Beyond the basics

Printing your settings

After you have your machine set as you want, have it print a settings list. We rec- ommend this particularly if you’ll be sharing the machine with other users, who might change the settings for one reason or another.

With this list, you can quickly confirm that all settings are as you want, without having to go back and check them on the machine. Or, if you do need to undo some- one else’s unauthorized (or even authorized) changes, this list guides you in returning the machine to your preferred settings.

Note: Some settings on the list affect only certain operations we’ll explain later. Please refer to the index at the end of these instructions to locate any set- ting you don’t recognize or understand.

To print the settings list, press PROGRAM, J, 2, 2, ENTER.

Printing a program list

You also can have your machine print a program list. This list gives a brief summary of the various instructions available on your fax machine, organized in a “program tree” so you can see which key combinations produce which instructions.

Note: Some settings on the list affect only certain operations we’ll explain later. Please refer to the index at the end of these instructions to locate any set- ting you don’t recognize or understand.

To print a program list, press PROGRAM, *, 8. Your machine will print the list.

Note: If you have certain options installed on your machine, the list will be two pages in length.

2.7