Muratec F-98 Getting everything just the way you want it, Setting up for scans

Beyond the basics

Getting everything just the way you want it

The EasyStart feature guided you through the “just-gotta” settings on your machine. In the next few pages, we’ll cover other settings.

Setting up for scans

You can set parameters regarding how your fax machine scans documents for either faxing or copying:

• Primary transmission mode — Gives you four ways to send faxes, either one of the three resolution modes — normal, fine or superfine (“S Fine” on the LCD)

— or in grayscale mode (“Gray”).

• Primary contrast mode — Sets how light or dark you want faxed documents to be when they arrive at their destinations.

1 Press PROGRAM, J, 0, 1, ENTER. The LCD asks which resolution you select:

Primary: Normal

Program/Enter

If the setting you see is acceptable, skip to step 3.

Otherwise, proceed to step 2.

2 To change the setting, press PROGRAM repeatedly until your chosen mode appears. In this example, we’ve chosen fine resolution.

Primary: Fine

Program/Enter

3 Press ENTER to save the setting. The LCD asks which contrast setting you select:

Contrast: Normal

Program/Enter

If the setting you see is acceptable, skip to step 5.

Otherwise, proceed to step 4.

4 To change the setting, press PROGRAM repeatedly until your chosen setting appears. In this example, we’ve chosen light contrast.

Contrast: Light

Program/Enter

5 Press ENTER to save the setting.

Of course, you always can change the resolution and contrast before sending. To adjust the resolution and contrast:

•Press RESOLUTION to change the resolution.

•Press CONTRAST to change the contrast.

2.2