Muratec F-98 Programmable one-touch keys, Using the power of programmable one-touch keys

Press ENTER. The LCD now shows either

Beyond the basics

Programmable one-touch keys

Using the power of programmable one-touch keys

The programmable one-touch keys P1–P6(fliptab b) simplify complex fax operations, letting you really tap into your machine’s power.

You can “teach” these keys the following multi-step operations for one-keypress con- venience (the pages shown contain instructions for the specific operations):

•Delayed transmission (pages 2.19–2.20)

•Broadcasting (page 2.16)

•Relay broadcast initiation (pages 2.17–2.18)

•Regular polling (pages 2.23–2.24)

•F-Code transmission (pages 2.32–2.33)

•F-Code polling (page 2.33)

The actions for setting up these operations is very similar for each one. For your convenience, we’ll give you full instructions on setting each operation. First, though, we’ll summarize by saying that each time you tell the machine four simple things:

•How — The key you’re programming

•Who — The number(s) the machine should dial

•What — The operation it should perform

•When — The date(s) and time(s) when you want it to perform the operation.

Programming a delayed transmission

Note: To erase a programmable one-touch key, refer to page 2.41.

To program a delayed transmission into a programmable one-touch key:

1 Press PROGRAM, C, 1, ENTER. The LCD either shows:

Select Program No.

P1:No Number Stored

… or indicates a command is already programmed into this key.

If P1 is the key you want to program, skip to step 3. (However, our examples from here will say “P3” rather than “P1.”)

2 Select the key in which you want to program a command or change a previ- ously stored command and then press it. Here, we’ve selected P3.

Select Program No.

P3:No Number Stored

3 If you change your mind and want to select a different programmable one- touch key, go back to step 2 before going on to step 4.

4

P3:Fax Number	or	P3:Fax Number
_		9-5558743_

5 Use the numeric keypad to enter the number exactly as your machine should dial it, including whatever codes your phone system may require. The num- ber can be up to 40 characters in length:

P3:Fax Number 9-5550629_

Your display can show only 20 characters at a time. To view characters beyond those 20 (such as with an international long-distance number), press to scroll leftward or to scroll rightward.

Important: Do not press ENTER.

Note: If you make a mistake or want to erase characters entered in a previ- ous setting, press CANCEL to erase leftward. Or, if you want to change just one character in the number, press to move the cursor leftward, or to move it rightward, to that character and press CANCEL to erase it. Then re-enter until the number is just as you want it.

6 Now, while you still can see the fax number on the LCD, press COM-OPTIONS,ENTER. The LCD shows:

Delayed

Enter Time: 11/20:30

2.34