Muratec F-98 Clearing a number from the blocked numbers list, Set BlockJunk Dial Program/Enter

Beyond the basics

4 The LCD now asks whether you want to enter a number:

Set BlockJunk Dial

Program/Enter

If you want to enter or modify a number, press ENTER and proceed to step 5. Otherwise, press PROGRAM and skip to step 10.

5 Depending on whether you have already entered at least one number into the blocked numbers list, the display shows one of the following:

Enter Fax Number	or	Select BlockJunk No.
01:_		01:555-2971

If you have not entered any numbers in the blocked numbers list, skip to step 7. Otherwise, proceed to step 6.

6 If you want to modify an existing entry in the blocked numbers list, press PROGRAM repeatedly until you see the number you want to modify.

… or …

If you want to enter a new number in an already-started blocked numbers list, press PROGRAM repeatedly until you find an empty position in the list (as in the first display in step 5).

Note: To clear a number from the list, see “Clearing a number from the blocked numbers list,” right column.

7 Use the numeric keypad to enter the last eight characters of a fax number you want to block. For example, if you want to block a fax from someone with a Subscriber ID of 972-555-3038,you should enter 5, 5, 5, -, 3, 0, 3, 8:

Enter Fax Number 01:555-3038

To change only a specific digit of an entry, press to move leftward or

to move rightward until the cursor is under the digit, then use the numeric keypad to enter the correct digit.

8 Press ENTER to save the setting. The display will show the next “slot” in the blocked numbers list.

If you do not want to enter or change a number for this slot, proceed to step 9. If you do want to enter or change a number for this slot, repeat steps 5–8.

9 Press STOP. The display now asks whether you want to print the list.

Print BlockJunk Dial

Enter/Stop

10 If you do want to print the list, press ENTER and your machine will print it. If you don’t want to print it, press STOP and your machine will return to its normal standby mode.

Clearing a number from the blocked numbers list

To clear a number from the list:

1 Press PROGRAM, J, 1, 1, ENTER.

If your Block Junk Fax setting is either Mode2 or Mode3, skip to step 3.

Block Junk Fax:Off

Program/Enter

2 Press PROGRAM until you see your preference, Mode2 or Mode3.

Block Junk Fax:Mode2

Program/Enter

3 Press ENTER, ENTER. The display shows:

Select BlockJunk No. 01:555-2971

If this is the number you want to clear, skip to step 5.

Otherwise, proceed to step 4.

4 Press PROGRAM repeatedly until you see the number you want to clear.

5 Press CANCEL to clear the number.

To clear another number from the blocked numbers list, repeat steps 4–5. Otherwise, proceed to step 6.

6 Press STOP. The display now asks whether you want to print the blocked numbers list.

Print BlockJunk Dial

Enter/Stop

If you do want to print the list, press ENTER and your machine will print it. Otherwise, press STOP to return your machine to its normal standby mode.

2.50