NEC 824, 308 To use Line Queuing, Automatic Line Access, Converting from Pulse to Tone Dialing

Outside Calls, Placing

To use Line Queuing: 1.

2.Press .

3.Dial Queue Group number (1-6).

●If you hear busy tone, the extension can not use Line Queuing for that group.

4.

Automatic Line Access

Automatic Line Access lets you access an outgoing line without press- ing a line key or dialing a two-digit line number. A single-digit code automatically accesses an outgoing outside line.

To access the first available outgoing line using Automatic Line Access:

To access the first available line in a Queue Group using Automatic Line Access:

1.Press .

2.Dial .

●A line is seized and dial tone comes over the speaker.

1.Press .

2.Dial Queue Group number (1-6).

●A line is seized and dial tone comes over the speaker.

Converting from Pulse to Tone Dialing

If your company is in a Dial Pulse area, you may need to change the dialing mode of your phone to tone (DTMF) after you place your ini- tial call. This allows you to use dial-up services like electronic bank- ing or a client's Voice Mail.

54