NEC NDA-30115-001 manual Room Data Report

Message Formats Property Management System - Communication Interface

Room Recovery (Model 90)

These messages are only used by the Model 90. When the PMS receives a Nop Test Recover Answer (70-2) message, it sends one Room Data Report message for each room. Prior to sending any recovery messages, however, a Recovery Start Report (70-3) must first be sent. Recovery is concluded by sending a Recovery End Report

(70-4).

The Room Recovery messages use the following Function Codes:

•57-1 -- Room Data Report

•57-3 -- Guest Room Secretary Telephone

•57-4 -- Connecting Room

•57-5 -- Message Status Report

•57-6 -- Wake Up

Room Data Report

0 1 2 3 4 6 8 9 15 21

02H

‘1’

‘!’

‘L’

‘5’ ‘7’

‘4’ ‘6’

‘1’

Extension

Group ID

Room Status

STX SA UA EI		FTC	MSC FC	6	6	1
22	23	24	25		26

Cleaning

Status

Key

VIP

Language

Display

Name

1	1	1	1	16
42	45	50	51

Data A

Data B

03H

xx

3 5 ETX BCC

Figure 4-50 Room Data Report

If Room Status is set to ‘0’ and Cleaning Status is set to either ‘3’ or ‘4’, the room data is cleared.

The message fields are:

•Extension -- Extension number. If the extension number is less than six digits, left justify the number and fill the remaining bytes with space (20H) characters.

•Group ID -- Group number for the extension. If the group number is less than six digits, left justify the number and fill the remaining bytes with space (20H) characters.

•Room Status -- Room status. This flag is used in conjunction with the cleaning status flag to determine the status of the room.

Page 78 NDA-30115 Revision 1.0