NETGEAR 202-11171-04 user manual D6200 WiFi DSL Modem Router Power On/Off LED

D6200 WiFi DSL Modem Router

Table 1. Power On/Off LED

Icon	LED Activity	Description
	Solid green	Power is supplied to the router.
	Solid red	POST (power-on self-test) failure or a device malfunction occurred.
	Blinking red	LED blinks momentarily when the Reset button on the back of the unit is
		pressed for 6 seconds. The Power LED then blinks red three times when
		the Reset button is released and then turns green as the gateway resets to
		the factory defaults.
	Off	Power is not supplied to the router.

Table 2. DSL LED

Icon	LED Activity	Description
	Solid green	You have an ADSL connection. In technical terms, the ADSL port is
		synchronized with an ISP network-access device.
	Blinking green	Indicates that the WiFi DSL modem router is negotiating the best possible
		speed on the ADSL line.
	Off	The unit is off or has no ADSL connection.

Table 3.	Internet LED
Icon	LED Activity	Description
	Solid green	You have an Internet connection. If this connection is dropped due to an
		idle time-out but the connection is still present, the LED stays green. If the
		Internet connection is dropped for any other reason, the LED turns off.
	Solid red	The Internet (IP) connection failed. For troubleshooting information, see
		Cannot Access the Internet on page 146.
	Blinking green	Data is being transmitted over the Internet connection.
	Off	No Internet connection is detected or the device is in bridge mode (an
		external device handles the ISP connection).

Hardware Setup

15