D6200 WiFi DSL Modem Router

Advertisement Time to Live. The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. The time to live hop count is the number of steps a broadcast packet is allowed to propagate for each UPnP advertisement before it disappears. The number of hops can range from 1 to 255. The default value for the advertisement time to live is 4 hops, which should be fine for most home networks. If you notice that some devices are not being updated or reached correctly, it might be necessary to increase this value.

UPnP Portmap Table. The UPnP Portmap table displays the IP address of each UPnP device that is accessing the WiFi DSL modem router and which ports (internal and external) that device has opened. The UPnP Portmap table also displays what type of port is open and whether that port is still active for each IP address.

3.Click Apply.

IPv6

You can use this feature to set up an IPv6 Internet connection type if NETGEAR genie does not detect it automatically.

To set up an IPv6 Internet connection type:

1. Select ADVANCED > Advanced Setup > IPv6.

2.Select the IPv6 connection type from the list. Your Internet service provider (ISP) can provide this information.

If your ISP did not provide details, select IPv6 Tunnel.

If you are not sure and want to have the WiFi DSL modem router detect the IPv6 type that is in use, select Auto Detect.

Advanced Settings

131

Page 131
Image 131
NETGEAR 202-11171-04 user manual IPv6