Advanced Settings
135
D6200 WiFi DSL Modem Router
•The remote VPN endpoint must have a matching SA, or else it refuses the connection.
Two types of VPN policies are possible:
•Manual. All settings (including the keys) for the VPN tunnel are input manually at each
end (both VPN endpoints). No third-party server or organization is involved.
•Auto. Some parameters for the VPN tunnel are generated automatically. This process
requires using the IKE (Internet Key Exchange) protocol to perform negotiations between
the two VPN endpoints.
To manage the VPN policies:
1. Click ADVANCED > Advanced Setup > VPN Policies.
The Policy Table contains the following data:
•Enable. Use this check box to enable or disable a policy as required. Click Apply
when you are finished.
•Name. Each policy has a unique name to identify it.
•Type. The type is Auto or Manual.
•Local. IP address or address range on your local LAN. Traffic must be from (or to) the
addresses covered by this policy.
•Remote. IP address or address range of the remote network. Traffic must be to (or
from) the addresses covered by this policy.
•ESP. Encapsulating Security Payload. This setting specifies the encryption protocol
used for the VPN data.
2. Click the appropriate button to manage a VPN policy:
•Edit. Edit (modify) the selected policy. (Select a policy by selecting the radio button.)