Nilfisk-ALTO RS 501 manuel dutilisation Manual Purpose and Contents, Target, Identification Data

USER MANUAL

ENGLISH

INTRODUCTION

MANUAL PURPOSE AND CONTENTS

This Manual is an integral part of the machine; its purpose is to provide the operator with all necessary information to use the machine properly in a safe and autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.

Before performing any procedure on the machine, the operators and qualifi ed technicians must read this Manual carefully. Contact Nilfi sk-Advance in case of doubts concerning the interpretation of the instructions and for any further information.

TARGET

This Manual is intended for operators and technicians qualifi ed to perform the machine maintenance.

The operators must not perform procedures reserved for qualifi ed technicians. Nilfi sk-Advance will not be responsible for damages coming from failure to follow these instructions.

HOW TO KEEP THIS MANUAL

The User Manual must be kept inside the machine cab, away from liquids and other substances that can cause damage to it.

CONFORMITY CERTIFICATE

Figure A shows a copy of the documentation certifying the sweeper conformity with the law in force.

NOTE

One copy of the original declaration of conformity is provided together with the machine documentation.

NOTE

If the machine is approved to be used on public roads, the machine is supplied with a special Certifi cation of Conformity.

IDENTIFICATION DATA

The machine serial number and model are shown on the adhesive label (1, Fig. C) and the plate (21, Fig. E) affi xed inside the cab. The machine serial number is also printed on the machine side (23, Fig. G).

The diesel engine serial number and model are marked in the positions shown in the relevant Manual; in some countries, a plate showing the same data is provided in the position (31, Fig. G).

This information is useful when ordering machine and diesel engine spare parts. Use the following table to write down the machine and diesel engine identifi cation data for any further reference.

MACHINE model ...............................................................................

MACHINE serial number ...................................................................

ENGINE model ..................................................................................

ENGINE serial number ......................................................................

OTHER REFERENCE MANUALS

The sweeper is also supplied with the following manuals:

–Diesel Engine Manual, to be considered as integral part of this Manual.

–Sweeper Spare Parts List

At Nilfi sk-Advance Service Centers the following Manual is also available:

–Sweeper Service Manual

RS 501

33015501(3)2008-02 A

3