Nortel Networks Contivity 2600 system board layout, Removing the Contivity 2600 top cover

60Chapter 4 Contivity 2600 Option Installation

Figure 25 Removing the Contivity 2600 top cover

Remove these four screws

Boot/Ready

Boot/Ready

Alert/Fail

Boot/Ready

Slide cover forward and lift up

CS260006A

➨Slide the top cover forward approximately 1/4 inch, then lift the lid 2 to 3 inches and move it away from the chassis.

Contivity 2600 system board layout

Figure 26 shows the Contivity 2600’s system board, in particular the DIMMs, option card slots, and the CPU cooling fan.

302283-E Rev 00