Nortel Networks 6140, 6120 manual Using the Dual Charger, Cleaning the Dual Charger

Dual Charger

Using the Dual Charger

To charge the WLAN Handset 6120 and 6140

1.Place the handset, face forward, into the front slot of the Dual Charger.

The handset can be off or in standby mode during charging. The LED displays the charging status. See instruction Single charger.

2.Charge the handset battery.

If the handset is in standby mode, it displays its extension number and Charging. It is fully operational and can receive calls. If the handset is off, only Charging is displayed and the handset cannot receive calls.

It is normal for the battery pack to become warm when charging.

3.When the handset is fully charged, Charge Complete is displayed. Remove the handset from the charger.

The battery pack starts to charge.

Cleaning the Dual Charger

Clean the Dual Charger by wiping the surface with a plain-water-dampened cloth or paper towel. A mild detergent solution can be used. Be sure to wipe away any detergent residue with a plain-water-dampened cloth.

CAUTION

Do not immerse the charger in water or other liquid.

Do not pour liquids into the charger slot.

You can clean the battery pack contacts on the handset with isopropyl (rubbing) alcohol applied with a cotton swab, cloth, or paper towel. Do not push or pull the

112