Other call features

Other call features

This section describes some of the call features available on your WLAN Handsets 6120 and 6140.

Use Call Page Connect to make an announcement

Use the Call Page Connect feature to make an announcement over a paging system.

Note: A Page key on an attendant console overrides and disconnects the telephones. The telephones must reaccess the Page trunk.

To connect to Call Page:

1.While the handset is in standby mode, enter the Page Trunk Access Code to complete the connection to the page system.

2.Make your announcement.

To disconnect Call Page:

3. Press the End button.

Use the Centrex/Exchange Switchhook Flash feature during an established call to use a Centrex service, such as Call Transfer or Three-Way Calling.

To use Centrex/Exchange Line

Switchhook Flash:

1.While in a call, press the Line button to access the Feature Keys menu.

2.Press the number that corresponds to the Centrex Switchhook Flash feature.

A special dial tone sounds.

3.Enter the codes for your custom Centrex feature.

4.Press the End button.