Battery packs
Removing and inserting the battery pack
To remove a battery pack
1. | Press down on the latch on the battery |
| pack at the back of the handset. |
2. | Pull the battery pack towards you. |
| The battery pack releases outward. |
To insert a battery pack |
|
1. | Slide the lip of the battery pack into the |
| handset cavity. |
2. | Push the top of the battery pack until it |
| snaps into place. |
| Do not force the battery pack into the |
| handset. |
Charging your handset
To charge a battery pack | You must charge the battery pack before its |
| first use. |
| 1. Press End to terminate any calls. |
| The handset can be off or in standby |
| state during charging. |
| 2. Place the handset, face forward, into the |
| Desktop Charger. |
| An animated charge icon indicates that |
| charging is in progress. |
| 3. Charge the battery pack. |
| If the handset is in standby mode, it |
| displays its extension number and |
| Charging. It is fully operational and can |
| receive calls. If the handset is off, only |
| Charging is displayed and the handset |
| cannot receive calls. |
106
