Nortel Networks 6120, 6140 manual Using the Single desktop charger, Cleaning the Desktop Charger

Desktop Chargers

Using the Single desktop charger

To charge the WLAN Handset 6120 and 6140

1.Press End to terminate any calls.

The handset can be off or in standby state during charging.

2.Place the handset, face forward, into the Desktop Charger.

An animated charge icon indicates that charging is in progress.

3.Charge the battery pack.

If the handset is in standby mode, it displays its extension number and Charging. It is fully operational and can receive calls. If the handset is off, only Charging is displayed and the handset cannot receive calls.

It is normal for the battery pack to become warm when charging.

4.When the handset is fully charged, Charge Complete is displayed. Remove the handset from the charger.

Cleaning the Desktop Charger

Clean the Desktop Charger by wiping the surface with a plain-water-dampened cloth or paper towel. A mild detergent solution can be used. Be sure to wipe away any detergent residue with a plain-water-dampened cloth.

CAUTION

Do not immerse the charger in water or any other liquid.

Do not pour liquids into the charger slot.

You can clean the battery pack contacts on the handset with isopropyl (rubbing) alcohol applied with a cotton swab, cloth, or paper towel. Do not push or pull the

109