Nortel Networks CVX 600 manual Reference, For information about the LEDs, see Checking the LEDs on

Replacing CVX 600 Components

Replacing Modules and Filler Panels

Step Action

3Ensure that the latch pawl is in the card guide channel and slide the module into the chassis until its connector touches the chassis mid-plane.

	AC PM
	AC PM 1
	AC PM 2
Fans
PDU 1	AC	PM
	BIP

	O
1	I
	BIP
	CVX-6oo
2
	O	PDU 2
3
	I	ESD
		Jack

4

5

6

CVX_0160B

Push the levers inward to fully engage the locking mechanism. The right lever will click when fully pushed in.

Good	Redun
Pwr	Fail

Close ejector levers CVX_0161C

Using a 1/4-inch flat-tip screwdriver, turn the locking screw 1/4 turn clockwise.

Observe the LEDs on the MAC or DAC-SM to verify proper operation.

Reference

For information about the LEDs, see “Checking the LEDs” on page 2-43.

296-1011-202 Rel. 5.0, Doc. Rev. 02.01 3-25