Nortel Networks CVX 600 manual Use a Phillips screwdriver to tighten the screws

CVX 600 Hardware Installation Guide

Installing the CVX 600 Chassis

Step Action

3Insert truss-head screws through each flange hole and into the corresponding holes on the front vertical supports of the rack.

O I 1

CVX 6oo 2

3	O
	I

4

5

6

Turn clockwise to tighten screws (75 in-lb for a PTE 2000 rack).

CVX-0241A

4 Use a Phillips screwdriver to tighten the screws.

Caution: You must tighten the screws sufficiently to support the CVX 600 chassis. If using the PTE 2000 rack, tighten the provided hex-head screws to 75 in-lb, using a torque-regulating ratchet. Nortel Networks cannot recommend a specific torque value for other racks.

1-24 296-1011-202 Rel. 5.0, Doc. Rev. 02.01