CVX 600 Hardware Installation Guide

Connecting Equipment to the Console Port

Connecting Equipment to the Console Port

Introduction

You can connect a terminal, PC, modem, or terminal server to the CVX 600, using the console port on the SCC.

The following procedures provide steps for connecting each piece of equipment:

Connecting a Terminal”

Connecting a PC”

“Connecting a Modem”

“Connecting a Terminal Server”

Note: Once you have connected this equipment, you can then edit your system configuration.

2-32

296-1011-202 Rel. 5.0, Doc. Rev. 02.01

Page 76
Image 76
Nortel Networks CVX 600 manual Connecting Equipment to the Console Port, Introduction