Nortel Networks CVX 600 manual Connecting a Terminal, Parameter Value

Chassis Connections

Connecting Equipment to the Console Port

Connecting a Terminal

To connect a terminal to the CVX 1800 using the DB-9 to DB-9 cable, follow these steps:

Step	Action
1	Turn on the terminal, then configure it using the parameters listed
	below.
	Reference: For instructions, see the documentation for the terminal or
	the terminal emulation program.
	Parameter	Value
	Terminal type	VT-100
	Baud rate	19200
	Connect using	Direct to COM 1
	Flow control	None
	Data bits	8
	Stop bits	1
	Parity	None
2	Turn off the terminal.
		(continued)

296-1011-202 Rel. 5.0, Doc. Rev. 02.01 2-33