Nortel Networks CVX 600 Tandem CVX to RAS CVX Crossover Cable, Tool and Parts Needed, Pin Data

CVX 600 Hardware Installation Guide

Tandem CVX to RAS CVX Crossover Cable

Tandem CVX to RAS CVX Crossover Cable

Introduction

If you need a crossover cable to send data from a tandem CVX 600 to a RAS CVX 600, you must build the cable using the information in this section. Nortel Networks does not supply this cable.

Tool and Parts Needed

To make the cable, you need the following items:

•CAT 5-conductor cable

•(2) RJ-45 connectors

•RJ-45 crimp tool

Pin Data

To assemble the cable, you also need to know the pin connections. The following table provides the tandem CVX switch to RAS CVX switch pin data.

From	To
Pin 1	Pin 4
Pin 2	Pin 5
Pin 4	Pin 1
Pin 5	Pin 2

A-14 296-1011-202 Rel. 5.0, Doc. Rev. 02.01