Oasis Concepts Diesel and AC Heating System for Recreational Vehicles and Yachts Figure 9-1:Distribution Module, DM12, Figure 9-2:Distribution Module Zone Box

Section 9, Installing the Distribution Module

•Module must be mounted using four, 1/4” through bolts using 1” diameter fender washers, lock washers and nuts. The module must be mounted in the position as shown against a wall or on the floor.

Figure 9-1: Distribution Module, DM12

9.3Selecting the Distribution Module Zone Box Location

•Mount the Distribution Module Zone Box (containing the Zone Control Board) vertically, close to the Distribution Module. Allow sufficient room to access the internal fuses as well as to view the display LED’s on the board itself.

•Mount the bracket against a wall using 2 flat head screws. The distribution module zone box will then click onto the bracket.

Figure 9-2: Distribution Module Zone Box

9-2 The Oasis™ Heating Module