Section 2, Mounting the Oasis™ Heating Module
parts that may cause injury through accidental contact should be protected.
|
| Isolate the unit in a closed compartment so that no air from the | |
| ! DANGER | |||
| heater will infiltrate the living areas. | ||
|
| ||
|
|
|
•It is recommended that a catchpan be placed under the Oasis™ Heating Module for containing any unexpected leakage.
•Choose a sturdy surface in a location that won’t be unduly affected by vibration and the jarring of rough roads or rough seas.
•Ensure that the exhaust tubing can be properly and safely routed to the outside. The maximum exhaust run for the system is 12’.
2.4What NOT to Do
•Don’t mount the Oasis™ Heating Module in the rear of the coach or yacht underneath the sleeping area. The sound of the Oasis™ Heating Module cycling on and off may disturb light sleepers.
2.5Procedure
After choosing the mounting location for the Oasis™ Heating Module, mount the module horizontally and level. Secure the Oasis™ Heating Module in place (against the wall, floor or a mounting platform) using eight (8) x 1/4” through bolts and 1” diameter fender washers, lock washers, and nuts. (See Figure
The Oasis™ Heating Module |