Section 2, Mounting the Oasis™ Heating Module
Make sure you are familiar with Section 1 – Overview of this Manual. If the system is not installed according to specifications and with the correct equipment, your Oasis™ Heating Module may not operate properly, safety may be compromised, and your Warranty may be voided.
2.2Identifying Your Oasis™ Heating Module Model
As the owner, you must be fully aware of the controls and operating features particular to your model of the Oasis™ Heating Module. This is essential for the proper functioning and life of your Oasis™ Heating Module as well as protecting your warranty. Your model can be identified by locating the serial number label on the outside case of the Oasis™ Heating Module. The serial number identifies the model type through the first series of letters and numbers.
The types of Oasis™ Heating Module models are:
CH50 – Oasis™ Heating Module
CH35 (“CSA Certification Pending”) – Oasis™ Heating Module
2.3Your Mounting Location
Your mounting location should consider the following:
•Mounting location must be able to support double the gross weight of the Oasis™ Heating Module (i.e. 160 lbs. x 2 = 320lbs./73 KG x 2 = 146 KG) and must be of a non- combustible and non absorptive surface.
•Oasis™ Heating Module is 14”H x 14”W x 30” D. (35.6 cm x 35.6 cm x 76.1 cm), see Figure
•Oasis™ Heating Module must be installed in a compartment which is completely isolated from the atmosphere of living spaces.
The Oasis™ Heating Module |