Oki MC860n MFP manual Transfer Belt Replacement

14.Gently lower the scanner.

NOTE

If you need to return or transport this product for any reason, please make sure you remove the image drum unit beforehand and place in the bag provided. This is to avoid toner spillage. Refer to “Appendix A - Moving and transporting” on page 175 for details.

Transfer Belt Replacement

The belt unit is located under the four image drums. This unit requires replacement approximately every 80,000 pages.

1.Switch off the MFP and allow the fuser to cool for about 10 minutes before opening the cover.

2.Pull the lever (a) firmly to release the lock and then gently raise the scanner (b).

a

b

Maintenance > 122