Oki MC860n MFP manual Feature, Option, Description, 30, 40 seconds, Stop, Continue

FEATURE	OPTION			DESCRIPTION
Print Setup	Print Menu	Print Setup	Width:	Selects the width of the paper
(cont.)	(cont.)	(cont.)	2.5~8.5~11.7 inches	defined by the “Custom” settings.
			Length:	Selects the length of the paper
			4.1~11~48 inches	defined by the “Custom” settings.
				Note that media of up to 1200 mm
				in length can be fed from the multi
				purpose tray for banner printing.
		Printer Adjust	Manual Timeout:	Specifies how many seconds the
			Disable, 30 seconds,	machine will wait for paper to be
			60 seconds	fed before cancelling the job.
			Wait Timeout:	Specifies how many seconds the
			Disable, 5, 10, 20,	machine will wait when received
			30, 40 seconds, 50,	data pauses before forcing a page
			60, 90, 120, 150,	eject. In PostScript Emulation
			180, 210, 240, 270,	mode the job will be cancelled if
			300 seconds	timeout occurs.
			Low Toner:	Specifies whether the machine
			Stop, Continue	should continue printing even after
				a low toner condition is detected.
			Jam Recovery:	Specifies whether the machine
			Disable, Enable	should perform jam recovery after
				a paper jam occurred. If enabled,
				the printer will attempt to re-print
				any pages lost due to a paper jam
				once the jam has been cleared.
			Paper Black Setting:	Used for micro adjustment when
			-2, -1, 0, +1, +2	very visible faded print results or
				light specks (or streaks) result
				when printing in Plain Paper/Black
				setting.
				Decrease the value if light specks
				(or streaks) or snow flake like
				printing results in high density
				print areas.
			Paper Color Setting:	Used for micro adjustment when
			-2, -1, 0, +1, +2	very visible faded print results or
				light specks (or streaks) result
				when printing in Plain Paper/Color
				setting.
				Decrease the value if light specks
				(or streaks) or snow flake like
				printing results in high density
				print areas.
			Trnspr Black Setting:	As for Paper Black Setting above.
			-2, -1, 0, +1, +2
			Trnspr Color Setting:	As for Paper Color Setting above.
			-2, -1, 0, +1, +2
			SMR Setting:	To correct variations in print
			-3, -2, -1, 0, +1, +2,	results caused by temperature/
			+3	humidity conditions and difference
				in print density/frequency.
				Change the setting when print
				quality is uneven.

Configuring Your Machine > 46