Oki MC860n MFP manual Setting the Fax Facility, Initial Set Up, Advanced Set Up

Setting the Fax Facility

NOTE

If you ran the Oki driver installer program from the CD-ROM you may have already set the time zone, date and time via the Panel Language Setup utility.

Initial Set Up

The following parameters must be set before using the fax function on your unit:

•Time zone

•Date and time

There are other parameters that can be adjusted to suit your personal preferences later if required, refer to fax set up table for details (See “Advanced Set Up” on page 64.).

To set fax parameters:

1.Press the Setup button on the control panel.

2.From the touch screen, press the Admin Setup button.

3.Using the on-screen keyboard, enter the admin password and press Enter.

4.From the touch screen, press the User Install button.

5.Select Time Zone and using the on-screen arrows or keypad, set the correct time differential.

6.If required, press Set Daylight Saving and select ON.

7.Select Time Setup and using the on-screen arrows or keypad, set the correct date and time.

8.Press Enter to confirm.

9.Press Enter to enable.

NOTE

If connecting the machine through a private branch exchange (PBX) line, you must also specify a dial prefix to allow the machine to obtain an external line before dialling. Refer to “Connecting to a PBX” on page 67.

Advanced Set Up

Your machine offers a multitude of features which reduce the time required for manual operation and make fax communications more efficient.

Configuring Your Machine > 64