Oki MC860n MFP manual Auto Emulation, Manual, Auto, Resident, PC-8

FEATURE	OPTION			DESCRIPTION
Print Setup	Color Menu	UCR	Low, Medium, High	Selects the limitation of the toner
(cont.)	(cont.)			layer thickness.
				If paper curl occurs in dark
				printing, selecting Medium or Low
				sometimes helps reduce curl.
		CMY100%	Disable, Enable	When enabled, black areas are
		Density		produced using 100% C, M, and Y
				instead of black. This results in a
				glossier finish.
		CMYK	OFF, ON	Setting to OFF will simplify the
		Conversion		conversion process of CMYK data,
				which will reduce process time.
				This setting is ignored when Ink
				Simulation function is used.
	Sys Config	Personality	Auto Emulation,	This item selects which industry
	Menu		PCL, IBM PPR, EPSON	standard emulation your unit
			FX, PS3 Emulation	should use. When set to Auto,
				incoming data is examined and the
				correct emulation is automatically
				selected each time a print job is
				received.
		Alarm release	Manual, Auto	When Manual, non-critical
				warnings, such as requests for a
				different paper size, can be
				cleared by pressing the RESET
				button. When set to Auto, they are
				cleared when the print job
				resumes.
		Auto Continue	OFF, ON	Determines whether or not the
				unit will automatically recover
				from a memory overflow
				condition.
		Error Report	OFF, ON	If ON, the unit will print error
				details when a PostScript
				emulation error occurs.
	PCL Setup	Font Source	Resident	Specifies the location of the PCL
				default font. Normally this will be
				internal unless additional fonts are
				installed in the expansion POM slot
				or additional fonts have been
				downloaded to RAM as permanent
				fonts.
		Font No.	100~90	Sets the PCL font number.
		Font Pitch	0.44~10.00~99.99	Sets the width of the PCL default
			CPI	font.
		Font Height	4.00~12.00~999.75	Sets the height of the PCL default
			Point	font.
		Symbol Set	PC-8	PCL symbol set. If the font source
				and number are changed to one
				which does not support the
				selected symbol set, this must be
				changed to an available symbol
				set for that font.

Configuring Your Machine > 49