Oki MC860n MFP manual Feature, Option, Description, Not Use, Long Edge, Short, 600x1200dpi

FEATURE	OPTION			DESCRIPTION
Print Setup	Print Menu	Tray	Paper Feed:	Specifies a feed tray (where n
		Configuration	Tray n, MPTray	identifies the tray).
			Auto Tray Switch:	Sets the automatic tray switch
			OFF, ON	function.
			Tray Sequence:	Specifies selection order priority
			Down, Up, Paper	for automatic tray selection/
			Feed Tray	automatic tray switch.
			MP Tray Usage:	When Mismatch: If a paper size or
			When Mismatch, Do	type in a tray is not matched to
			Not Use	that of the print data, use paper
				from this tray instead of the
				specified tray.
				Do Not Use: Makes the MP tray
				unavailable in auto tray selection/
				switching.
			Media Check:	Determines whether the machine
			Disable, Enable	checks the size of the media
				loaded matches that required for
				the document sent to print.
		Print Setup	Copies:	Enter the number of copies of a
			001 - 999 copies	document to be printed from 1 to
				999.
			Duplex:	Switches the duplex (2 sided)
			OFF, ON	function OFF/ON.
			Binding:	Sets the default binding to LEF or
			Long Edge, Short	SEF.
			Edge	Only available when Duplex is ON.
			Resolution:	Sets the default resolution for
			600dpi,	printing (dots per inch).
			600x1200dpi,	600x1200dpi uses more memory
			600dpi M-LEVEL	and requires more time to process,
				but prints at a higher quality.
			Toner Save Mode:	Reduces the amount of toner used
			OFF, ON	for imaging. Toner saving gives
				lighter prints but is more
				economical.

Configuring Your Machine > 44