Oki MC860n MFP manual Feature, Option, Description, Current assigned subnet mask. To

FEATURE	OPTION			DESCRIPTION
Network	Network	Subnet Mask	xxx.xxx.xxx.xxx	Current assigned subnet mask. To
Menu (cont.)	Setup			change, proceed as above.
	(cont.)			Display condition: TCP/IP protocol
				must be enabled.
		Gateway	xxx.xxx.xxx.xxx	Current assigned gateway
		Address		address. To change, proceed as
				above.
				Display condition: TCP/IP protocol
				must be enabled.
		Web	Disable, Enable	Enables or disables web config.
				facility.
				Display condition: TCP/IP protocol
				must be enabled.
		Telnet	Disable, Enable	Enables or disables Telnet config.
				facility.
				Display condition: TCP/IP protocol
				must be enabled.
		FTP	Disable, Enable	Enables or disables communication
				via FTP.
				Display condition: TCP/IP protocol
				must be enabled.
		IPSec	Disable, Enable	Enable via the web page or
				Configuration Tool.
		SNMP	Disable, Enable	Enables or disables SNMP of FTP
				(TCP/IP or NetWare).
				Display condition: TCP/IP protocol
				must be enabled.
		Network Scale	Small, Normal	Normal: Can work effectively even
				when connected to a HUB that has
				a spanning tree feature. However,
				printer start up time gets longer
				when computers are connected to
				two or three small LANs.
				Small: Computers can cover from
				two or three small LANs to a large
				LAN, but it may not work
				effectively when it is connected to
				a HUB with a spanning tree
				feature.
		HUB Link	Auto Negotiate,	Sets the hub linking method.
		Setting	100BASE-TX FULL,
			100BASE-TX HALF,
			10BASE-T FULL,
			10BASE-T HALF
		Network PS-	ASCII, RAW	Select PostScript data format for
		Protocol		the network port.
		Factory Defaults	Execute	Select Yes to reload the settings
				present when the unit was setup
				by the manufacturer.
	Mail Server	SMTP server		Set the host name for the SMTP
	Setup			server.
		SMTP Port	00000 ~ 00025 ~	Set the port number.
			65535

Configuring Your Machine > 53