Oki MC860n MFP manual Installing Upgrades, Order Codes, Memory Upgrade

Installing Upgrades

This section explains how to install optional equipment into your MFP. This includes:

•additional RAM memory

•paper tray(s) and storage cabinet assembly

Order Codes

OPTION	ORDER CODE
RAM memory; 512Mb	70051701
One paper tray and tall storage cabinet	44020402
Two paper trays and short storage	44020502
cabinet

Memory Upgrade

This section explains how to install additional RAM memory into your MFP as a memory upgrade.

The model comes equipped with 512 MB (256 MB + 256 MB) of main memory. This can be upgraded with an additional memory board containing 512 MB, giving a total memory capacity of 768 MB maximum.

NOTE

The maximum capacity of your machine is 768 MB, therefore the existing 256 MB board must be removed from the RAM expansion slot before the new memory upgrade board can be fitted.

1.Switch the MFP off and disconnect the power cable.

2.Pull open the access panel on the side of the machine.

3.Carefully remove the new memory board from its wrapping. Try to handle the board only by its short edges, avoiding contact with any metal parts as far as possible. In particular, avoid touching the edge connector.

Notice that the memory board has a small cutout in the edge connector, which is closer to one end than the other.

4.Identify the RAM expansion slot in the machine.

Installing Upgrades > 134