Oki MC860n MFP manual Feature, Option, Description, Password, enable Rx Protect, Auto

FEATURE	OPTION			DESCRIPTION
Fax Setup	Default	MCF Report	OFF, ON	If enabled, the result of the
(cont.)	Settings			transmission will be printed out
	(cont/)			each time.
		Memory Tx	OFF, ON	This sets the transmission mode to
				memory Tx (ON) or real-time Tx
				(OFF).
	F-Code Box	Register/Edit	Secure Box	Secure Box: received data cannot
	F-Code Box			be printed without entering ID
				code (for secret documents).
				Use the numeric keypad to enter
				the sub-address and ID code (note
				enter a 4 digit ID code).
				You can also enter a Box Name,
				Password and specify the hold
				time for your secure box.
			Bulletin Box	Bulletin Box: Enable to transmit/
				receive documents to/from
				Bulletin.
				You can also enter a Box Name,
				Password, enable Rx Protect, Auto
				Print, OverWrite, Erase Tx Doc and
				specify a four digit ID code.
		Delete		Select the box number to delete
				and press Yes to confirm deletion.
				If you are deleting a secure box
				entry, enter the 4 digit ID code
				and press Yes to confirm deletion.
	Security	ID check Tx	OFF, ON	Check and match the last four
	function			digits of the destination fax
				numbers with those registered in
				the target. If ON, the unit will send
				only when they match.
		Check broadcast	OFF, ON	Fax number confirmation screen
		dest.		displays before sending the fax.
		Confirm Dial	OFF, ON	When ON, you will be asked to re-
				enter the destination fax number.
				The fax will only be sent when the
				two numbers match.
	Auto Print	Setting	OFF, ON	Enable/disable auto print journal
	Journal			report.
	Report
		Print time	OFF, ON	When ON, enter the time using
				the arrow keys or keypad.
				The journal report will be printed
				at the specified time every day.
	Other	Redial Tries	00~02~15 Times	Set the number of redial attempts.
	Settings
		Redial Interval	0~1~5 Min	Set the time between redial
				attempts.

Configuring Your Machine > 39