Oki MC860n MFP manual Execute

FEATURE	OPTION				DESCRIPTION
Print Setup	Print Menu	Printer Adjust	BG Setting:		To correct variations in print
(cont.)	(cont.)	(cont.)	-3, -2, -1, 0, +1, +2,		results caused by temperature/
			+3		humidity conditions and difference
					in print density/frequency.
					Change the setting when
					background is dark.
		Print Position	Front X Adjust:		X adjust: Adjusts the position of
		Adjust	-2.00~0~+2.00 mm		the whole printing image
			Front Y Adjust:		perpendicular to the direction of
			-2.00~0~+2.00	mm	paper movement (i.e.
			Back X Adjust:		horizontally).
					Y adjust: Adjusts the position of
			-2.00~0~+2.00	mm
			Back Y Adjust:		the whole printing image parallel
					to the direction of paper
			-2.00~0~+2.00 mm
					movement (i.e. vertically).
		Drum Cleaning	OFF, ON		Set to produce idling of a drum
					before printing in order to reduce
					horizontal white lines. This
					shortens image drum life.
		Hex Dump	OFF, ON		Prints out the data received from
					the host PC in hexidecimal code.
	Color Menu	Density Control	Manual, Auto		If set to Auto, image density will
					be automatically adjusted at
					power on, when a new image
					drum or toner cartridge is
					installed, and at intervals of 100,
					300 and 500 drum counts. If a 500
					drum count interval occurs during
					a print job it will occur at the end
					of that job, and will take up to 55
					seconds. If set to manual, this
					adjustment will only be performed
					when initiated by the next menu
					item.
		Adjust Density	Execute		Press Yes to execute or No to
					cancel.
					Selecting this will perform the auto
					density set up immediately.
		Color Tuning/	Execute		Press Yes to execute or No to
		Print Pattern			cancel.
					Selecting this item prints the color
					tuning pattern to help you adjust
					the color balance.

Configuring Your Machine > 47