Omega CN1166 manual Output 2 TYPE/OUTPUT 3 Type

2.6OUTPUT 2 TYPE/OUTPUT 3 TYPE

The type of output for Output 2 and Output 3 is determined by the Option PCB fitted in the appropriate position (see Figure 2-1) and, in the case of the DC Output Option PCB being fitted, the setting of Link Jumpers LJ8 and LJ9 on that Option PCB (see Figure 2-6 and Table 2-3). There are three types of option PCB which may be used for Output 2 and Output 3:

1.Relay Output Option PCB (no link jumpers)

2.Solid State Output Option PCB (no link jumpers)

3.SSR Drive Output Option PCB (no link jumpers)

3. DC Output Option PCB (link jumpers as shown in Figure 2-6)

LJ9 LJ8

Figure 2-6 DC Output Option PCB (Output 2/Output 3)

Table 2-3 Selection of Output 2 & Output 3 Type

DC Output Range	Link Jumpers Fitted
DC (0 - 10V)	LJ8
DC (0 - 20mA)	LJ9
DC (0 - 5V)	LJ8
DC (4 - 20mA)	LJ9

2-6 Volume I S077-2