Omega CN1166 manual Resistance Temperature Detector RTD and DC mV Ranges selectable

Type		Input Range	Displayed Code		Type		Input Range	Displayed Code
L		0.0 - 205.7￿C	1815		B		211 - 3315￿F	1934
L		32.0 - 402.2￿F	1816		B		100 - 1824￿C	1938
L		0 - 450￿C	1817		N		0 - 1399￿C	5371
L		32 - 841￿F	1818		N		32 - 2550￿F	5324
L		0 - 762￿C	1819		C/W5		0 - 2316￿C	5111
L		32 - 1403￿F	1820		C/W5		32 - 4201￿F	5112
Thermocouple: Ranges selectable from front panel:
Calibration:				Complies with BS4937, NBS125 and
				IEC584.
Sensor Break Protection:				Break detected within two seconds. Control
				outputs set to OFF (0% power); Alarms
				operate as if the process variable has gone
				over-range.
	Input Range		Displayed Code			Input Range		Displayed Code
0 - 800￿C *			7220		0.0 - 100.9￿C			2295
32 - 1471￿F			7221		32.0 - 213.6￿F			2296
32 - 571￿F			2229		-200 - 206￿C			2297
-100.9 - 100.0￿C			2230		-328 - 402￿F			2298
-149.7 - 211.9￿F			2231		-100.9 - 537.3￿C			7222
	0 - 300￿C		2251		-149.7 - 999.1￿F			7223

* Default

Resistance Temperature Detector (RTD) and DC mV: Ranges selectable

from front panel:

Type and Connection:	Three-wire Pt100
Calibration:	Complies with BS1904 and DIN43760.
Lead Compensation:	Automatic scheme.
RTD Sensor Current:	150￿A (approximately)
Sensor Break Protection:	Break detected within two seconds. Control
	outputs set to OFF (0% power). For RTD
	input, alarms operate as if the process
	variable has gone under-range. For DC

S077-A Volume II A-2