Omega CN1166 manual Entry Into Configuration Mode, Hardware Definition Code

3CONFIGURATION MODE

3.1ENTRY INTO CONFIGURATION MODE

Powe r-up the Profile Controlle r.

Within 30 secs. as 1st

key action after power-up.

		To display	Value
			Identifier
		Profile Controller is in
HO LD DO WN		Configuration Mode and
SIMU LTAN EO U SLY		displays current input code
For five seconds
In Configurat ion Mode:
			To confirm new
To select		To change value	value (upper
parameter	(upper display flashes)		display is static)

Figure 3-1 Entry into Configuration Mode

NOTE: Changes to the value/setting of certain Configuration Mode parameters (e.g. input range, output use and type) will cause the Set Up Mode parameters to be automatically set to their default values the next time Set Up Mode is entered (see also Volume II, beginning of Section 2).

3.2HARDWARE DEFINITION CODE

This parameter is a special facility in Configuration Mode, which is used to represent the hardware fitted (input type, Output 1 type, Output 2 type and Output 3 type); this must be compatible with the hardware actually fitted. For access to, and adjustment of, the Hardware Definition Code, see Figure 3-2 and Table 3-1.

S077-3 Volume I 3-1