1

S E T T I N G U P

C H A P T E R

1Press Phone .

2If prompted, press Center to turn off Keyguard (see Locking your keyboard (Keyguard) for more info).

3If you haven’t already activated your phone, follow these steps before continuing:

Tap the onscreen Dial Pad to enter *228.

Press Send to dial.

When prompted, press 1 (this number appears on the E letter key) to program your phone. A service provisioning message appears on your smartphone screen.

Wait a few minutes until you see the Programming Successful! message, and then tap the onscreen OK button. If the Ringer switch is set to Sound

On , you hear three tones when programming is successful.

Press Power/End to end the call.

4Tap the onscreen Dial Pad to enter the number you want to call.

5Press Send to dial.

6After you finish the call, press Power/

End to end the call.

TIP You can also dial phone numbers with the number pad on the keyboard. See Dialing using the keyboard for details.

Adjusting call volume

While a call is in progress, press the Volume button on the side of your smartphone to adjust the call volume.

To increase the volume, press the upper half of the Volume button.

To decrease the volume, press the lower half of the Volume button.

20 M A K I N G Y O U R F I R S T C A L L

Page 20
Image 20
Palm 755P manual On , you hear three tones when programming is successful, Adjusting call volume