Panasonic AJ-LT85P Synchro, EDL Auto, Clr, After, Cue-Up, Split Edit, Video, 1ST Edit, Dur, End

DETAILED DESCRIPTION OF SET-UP MENUS

EDIT

	Item		Setting			V	V
					Description of setting	T	T
No.	Item	No.		Item		R	R
						1	2
307	SYNCHRO	0000		OFF	This sets whether to suspend editing when phase synchronization is not pos-
	EDIT	0001		ON	sible with a ±0 frame accuracy while SYNCHRO is set to ON.		ª
					0: Phase synchronization is not suspended.
					1: Phase synchronization is suspended.
308	SYNCHRO	0000		VTR1	This selects the deck to be phase-synchronized.		ª
		0001		VTR2	0: VTR1 is phase-synchronized.
					1: VTR2 is phase-synchronized.
309	EDL AUTO	0000		OFF	This sets whether the first edit is to be cleared and the subsequent edits can
	CLR	0001		ON	be overwritten when the maximum number of edits have been registered.		ª
					0: Edits cannot be overwritten.
					1: Edits can be overwritten.
310	AFTER	0000		STOP	This selects the laptop’s mode upon completion of a cue-up operation.		ª
	CUE-UP	0001		STILL	0: STOP mode
					1: Still picture (SHTL+0.0, JOG STILL) mode
311	SPLIT EDIT	0000		VIDEO	This sets the split editing reference.
		0001		AUDIO	0: The audio edit point is split with the video edit point serving as the reference.		ª
					1: The video edit point is split with the audio edit point serving as the reference.
312	1ST EDIT	0000		26s	This sets the black burst signal recording duration in the 1ST EDIT mode.
	DUR	0001		T-END	0: A black burst signal is recorded for 26 seconds, then the tape is rewound
					for 3 seconds and stops.		ª
					The point at which the tape stops is set as the 1ST EDIT PRESET.
					1: A black burst signal is recorded until the end of the tape or until the ALL
					STOP button is pressed. If the signal is recorded until the end of the tape,
					the tape is then rewound automatically to the 1ST EDIT PRESET position.
313	1ST				This sets the preset value in the first edit mode.		ª
	EDIT				00:00:00:00 to 23:59:59:29

The underlined number and item are the factory settings.

28