Panasonic AJ-LT85P manual Detailed Description Of Set-Up Menus, Operation

DETAILED DESCRIPTION OF SET-UP MENUS

OPERATION

	Item		Setting		V	V
				Description of setting	T	T
No.	Item	No.	Item		R	R
					1	2
108	HUMID	0000	OFF	This selects whether condensation is to be ignored when it has formed and
	OPE	0001	ON	operation is to be continued.
				0: Operation is disabled.
				1: Operation is enabled. Although operation is still possible even when con-
				densation has formed, the unit’s operation cannot be guaranteed.		ª
				<Note>
				Since the tape may be damaged or other trouble may occur when “1:
				Operation is enabled” is selected, “0: Operation is disabled” is normally
				selected.
109	SEARCH	0000	DIAL	This selects whether the direct search operation is to be performed.
	ENA	0001	KEY	DIAL: Direct search mode		ª
				KEY: No direct search mode (The search dial is operable in the STILL mode
				only.)
110	AUTO REW	0000	OFF	This selects whether the tape is automatically rewound to the beginning when
		0001	ON	the end of the tape is detected in the PLAY, REC, or SHTL modes.	ª	ª
				0: Transport stops at the end of the tape.
				1: The tape is automatically rewound to the beginning.
111	ALL STOP SEL	0000	STOP	This is used to select the mode to which the unit is to be set when the ALL
		0001	STILL	STOP button is pressed.		ª
				0: The unit is set to the STOP mode.
				1: The unit is set to the still-picutre mode (SHTL +0.0, JOG STILL).

The underlined number and item are the factory settings.

Detailed description of set-up menus

25