Panasonic AJ-LT85P manual Detailed Description Of Set-Up Menus, Audio

DETAILED DESCRIPTION OF SET-UP MENUS

AUDIO

	Item		Setting		V	V
				Description of setting	T	T
No.	Item	No.	Item		R	R
					1	2
707	DV	0000	ST1	This selects the audio CH1 and CH2 outputs during DV format playback.
	OUTPUT	0001	ST2	0: The CH1 track is output for CH1 and CH2 track for CH2.	ª	ª
		0002	ST1+2	1: The CH3 track is output for CH1 and CH4 track for CH2.
				2: The CH1 and CH3 tracks are mixed and output to CH1, and the CH2 and
				CH4 tracks are mixed and output to CH2.
708	PB FADE	0000	AUTO	This selects how the audio edit points (IN, OUT) are to be processed during
		0001	CUT	playback.	ª	ª
		0002	FADE	0: Processing accords with status during recording.
				1: Forced cut editing
				2: Forced fade editing
709	AUDIO	0000	PCM	This sets the audio output mode during slow playback.
	SLOW	0001	CUE	0: PCM mode: the PCM audio signals are output between –0.43 and +1, and
		0002	A-CUE	the CUE audio signals are output at other speeds.	ª	ª
				1: CUE mode: the PCM audio signals are output at the FWD ⋅1 speed; the
				cue audio signals are output at any other speed.
				2: ALL CUE mode: the cue audio signals are output at all speeds including
				the FWD ⋅1 speed.
710	SHTL	0000	OFF	This selects whether the cue audio is to be output to LINE OUT in the shuttle
	AUDIO	0001	CUE	mode.	ª	ª
				0: Cue audio is not output.
				1: Cue audio is output.
711	AUTO	0000	V1+V2	This selects the signal to be output to the speaker/headphone.
	MONI	0001	AUTO	0: Processing accords with the SPEAKER/HEADPHONES switch.
				1: The signal of the VTR operated last is output.
				<Notes>		ª
				• If the OPERATION MODE switch set to the “SEPARATE” position, output is
				fixed at “V1 + V2.”
				• If the CONTROL switch set to the “REMOTE” or “EXT VTR” position, output
				is fixed at “V1 + V2.”
712	DV PB	0000	OFF	This selects the output level while a DV tape is being played back.	ª	ª
	ATT	0001	ON	OFF: Output level is not reduced.
				ON: Output level is reduced.
713	CH1 REC SEL	0000	CH1	This selects the signals to be recorded on CH1.
		0001	CH2	0: CH1 input		ª
		0002	MIX	1: CH2 input
				2: CH1 input and CH2 input mixed signals
714	CH2 REC SEL	0000	CH1	This selects the signals to be recorded on CH2.
		0001	CH2	0: CH1 input		ª
		0002	MIX	1: CH2 input
				2: CH1 input and CH2 input mixed signals

The underlined number and item are the factory settings.

34