Panasonic AJ-LT85P Error Messages, Error No, Details of error, VTR operation, Forced POWER OFF

ERROR MESSAGES

Error No.	Details of error	VTR operation
E-64	The take-up reel motor speed is abnormally high.	STOP
E-65	Abnormal tension has been detected.	STOP
E-66	At the tape start or end, the short FF or REW operation does not stop even after 7	STOP
	or more seconds.
E-67	A check sum error was detected in the serial data communication between the	STOP
	syscon and servo.
E-68	In serial data communication between the syscon and servo, the data was fixed at	STOP
	low or high and the absence of data was detected.
E-69	A communication error was detected in the serial data between the syscon and	STOP
	servo when the power was turned on.
E-70	About an hour has elapsed after the fan motor stopped. The VTR forcibly turns off	Forced POWER OFF
	its power.
E-71	The heat sensor was activated and an abnormally high temperature inside the	Forced POWER OFF
	VTR was detected.
E-72	Trouble in the solenoid drive circuitry was detected.	Forced POWER OFF
E-73	Trouble in the cleaning solenoid drive circuitry was detected.	Forced POWER OFF
E-BA	The input supply voltage dropped below the undercut voltage.	Forced POWER OFF (*)

(*) The counter display flashes to provide a warning.

70