SUPERIMPOSE SCREEN DISPLAYS
Superimposed displays can be added to the laptop’s
TOR connector.
Block 1 |
|
| Block 2 |
|
|
|
| Block 3 | ||||||
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TCR |
|
|
|
|
| 12 : 34 : 43 : 21 |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| SHTL | + | 32.0 |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Block 4
Block 3
The counter values are displayed in units of hours, minutes, seconds and frames.
12 : 34 : 43 : 21
:
. Drop frame mode
: Normal mode
. Time track mode
Block 4 (when T&STA is set for the
No. 000) |
|
EJECT | E_PLAY |
STOP | SHTL |
REW | JOG |
FF | VAR |
STOP | PPLY |
STANDBY_OFF | POWER OFF |
PLAY | AUTO OFF |
REC | DEW |
EDIT |
|
Block 1 |
|
CTL : | Control signal |
TCR : | Time code |
T*R : | Time code (when it cannot be read) |
UBR : | User bit |
U*R : | User bit (when it cannot be read) |
TCG : | Time code generator value |
UBG : | User bit generator value |
Block 2
No display : Normally, nothing is displayed here.
P : When the supply voltage has dropped
S : When the fan has stopped
L : When LOW RF
•Search speed display
•REV, SHTL and FWD are displayed during external VTR control.
•In the jog mode, REV, STILL or FWD is displayed.
•The tape speed is displayed in SHTL, VAR and PPLY.
SHTL – 32.0(where “32.0” is the speed and
Block 4 (when T&YMD, T&MDY, T&DMY or T&RT is set for the
DATE: Date on which tape was shot
D*TE: Date on which tape was shot (when it cannot be read)
TIME: Time (hr/min/sec) at which tape was shot
T*ME: Time at which tape was shot (when it cannot be read)
With the
To superimpose displays:
First check the connections, and then press the COUNTER/REMAIN switch. Check that characters are now displayed on the monitor.
If no characters are superimposed, press the COUNTER/REMAIN switch again.
For details on the superimposed display function, refer to the next page.
66
