Panasonic IMC80A specifications Environment, Power, Circuit Breaker, Peripheral Equipment

[Reference]

Peripheral Equipment

Environment

The servo driver should be used under Contamination Level 2 or 1 specified by IEC60664-1 (housing the driver in an IP54 control box).

Control box

		Controller
		Power supply for
		insulated type
		interface		CN X5
Insulating			AC servo
transformer
		Noise filter for		driver
		signal lines		Noise filter for
				signal lines
Power		CN X1
			L1	CN	AC servo
Circuit	Leakage	Noise filter
breaker	breaker(RCD)		L2	X3	driver
			L3	U
				V	M
				W
				E	RE
		Surge
		absorber
				CN X4

Protective earth (PE)

Power

	+	10%	+	10%
Single-phase 100V: Single-phase 100V	-	15 % to 115V	-	15 % 50/60Hz
	+	10%	+	10%
Single-phase 200V: Single-phase 200V	-	15 % to 240V	-	15 % 50/60Hz
	+	10%	+	10%
Three-phase 200V: Three-phase 200V	-	15 % to 240V	-	15 % 50/60Hz

(1)Use under the environment of Over-voltage Category II specified by IEC60664-1

In order to realize the environment of overvoltage category II, install in the power supply input unit an insulating transformer that is compliant with ICE or EN standard (EN 60742).

(2)The power for interface should be marked CE or appropriate EN Standard type (EN60950), 12VDC to 24VDC, insulated.

Circuit Breaker

Install a circuit breaker between the power supply and noise filter. The circuit breaker should be IEC Standard and

UL listed marked.

Reference

181