Automatic Dialling
Storing names and telephone numbers into one- touch dial
For rapid access to frequently dialled numbers, the unit provides 12 entries for
LStations 1 to 3 can be used alternatively as broadcast keys (page 38).
{FLASH} |
| {MENU} |
(Hyphen) | Station keys |
{LOWER} {<} {>} {SET}
{STOP}
(Delete)
1 Press {MENU} repeatedly until the following is displayed.
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.[( )]
2 Select the desired station key.
For stations 1–3:
1.Press one of the station keys.
Example: STATION 1 | [±] |
DIAL MODE |
2.Press {SET} to go to the next prompt.
For stations
Press one of the station keys.
For stations
Press {LOWER}, then press one of the station keys.
3 Enter the name, up to 10 characters (see page 20 for instructions).
Example: NAME=John
STORE:PRESS SET
5 Enter the telephone number, up to 30 digits, using the dial keypad.
Example: <S01>=1114497
LIf you want to enter a hyphen, press
{FLASH}.
6 Press {SET}.
REGISTERED
u
DIRECTORY SET
PRESS STATION OR
b
DIRECTORY SET
PRESS NAVI.[( )]
LTo program other entries, repeat steps 2 to 6.
7 Press {STOP} to exit the program.
Helpful hint:
LYou can confirm the stored entries on the telephone number list (page 84).
Note:
LA hyphen or a space entered in a telephone number counts as two digits.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect character/number, and then make the correction.
To delete a character/number
Move the cursor to the character/number you want to delete, and press {STOP}.
4 Press {SET}.
Example:
<S01>=
- 23 -