Setup
Toner cartridge and drum unit
Caution:
L Read the instructions below before you begin installation. After you have read them, open the drum unit protection bag. The drum unit contains a photosensitive drum. Exposing it to light may damage the drum. Once you have opened the protection bag:
– Do not expose the drum unit to light for more than 5 minutes.
– Do not touch or scratch the green drum surface.
– Do not place the drum unit near dust or dirt, or in a high humidity area.
– Do not expose the drum unit to direct sunlight.
L Do not leave the toner cartridge out of the protection bag for a long time. It will decrease the
toner life. |
|
|
1 Before opening the protection bag of the | 4 Slide the tab on the toner cartridge into the | |
new toner cartridge, shake it vertically more | slot of the drum unit. | TabSlot |
than 5 times. |
| |
|
|
5
2
Firmly press down on the right side of the toner cartridge to snap into position.
1TonerSealcartridge | 2DrumProtectionunitbar |
3 With “Panasonic” face up on the toner cartridge, match the red arrows on the cartridge and the drum unit.
Hold here.
| Toner |
| cartridge |
Red arrows |
|
Drum unit | Green drum |
| surface |
6 Turn the two levers on the toner cartridge with firm pressure.
Levers
- 13 -