Operations
The document does not feed into the fax machine.
LRemove the document and reinsert it.
Even after clicking [Cancel], scanning continues.
LPlease wait. It may take a while for the cancel request to be accepted.
Multi-Function Station does not work properly.
LClick the [X] button to exit
LIf you connect the USB cable to USB hub, connect it to the USB port of your computer directly.
LConfirm the BIOS setting of your computer. For parallel connection, select ECP, Bi- directional or an equivalent parallel port mode. For USB connection, select USB port mode. Please refer to your PC operating instructions or consult the manufacturer.
LIf you have any other multifunction softwares installed on your computer, uninstall them.
I want to replace the parallel cable with a USB cable and vice versa.
LYou must change the printer properties.
1.Replace the cables.
2.Set the connection type (parallel or USB) by using the fax machine according to the cable type you use (feature #15 on page 64).
3.Click [Start], point to [Settings], then click [Printers].
4.
5.Click the [Details] (Windows 98/Me)/[Ports] (Windows 2000) tab, select the connection type, then click [OK]. If
If a power failure occurs
LThe unit will not function.
LThe unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.
LFax transmission and reception will be interrupted.
LIf any fax documents are stored in the memory, they will be lost. When power is restored, a power down report will be printed out stating which contents in the memory have been erased.
- 74 -
