Error Messages
LINE IN USE
LYou cannot change the cable type setting (feature #15 on page 64) while the line is in use. Hang up and try again.
MEMORY FULL
LWhen making a copy, the document being stored exceeds the memory capacity of the unit. Press {STOP} to clear the message. Divide the document into sections.
MODEM ERROR
LThere is something wrong with the modem circuit. Contact our service personnel.
NO FAX REPLY
LThe other party’s fax machine is busy or has run out of recording paper. Try again.
OUT OF PAPER
LRecording paper is not installed or the unit has run out of paper. Install paper (page 16).
LRecording paper is not fed into the unit properly. Reinstall paper (page 16).
PAPER JAMMED
LA recording paper jam occurred. Clear the jammed paper (page 78).
PC FAIL OR BUSY
LThe cable or the PC power cord is not connected correctly. Check the connections (page 54).
LThe software is not running on the PC. Restart the software and try again.
PLEASE WAIT
LThe unit is warming up. Wait for a while.
REDIAL TIME OUT
LThe other party’s fax machine is busy or has run out of recording paper. Try again.
REMOVE DOCUMENT
LThe document is jammed. Remove the jammed document (page 80).
LAttempted to transmit a document longer than 600 mm. Press {STOP} to remove the document. Divide the document into two or more sheets and try again.
TONER EMPTY
LThe toner cartridge is empty. Replace the toner cartridge (page 75).
TONER LOW
LThe remaining toner is low. Replace the toner cartridge as soon as possible (page 75). We recommend you replace the drum unit every third time you replace the toner cartridge. To check the drum life and quality, please print the printer test list (page 84).
TRANSMIT ERROR
LA transmission error occurred. Try again.
WRONG PAPER
LThe fax message was printed on paper which is shorter than A4 size paper. Use the appropriate size paper (page 16).
- 70 -