Sending Faxes
6 Press {SET}.
DELETE OK?
YES:SET/NO:STOP
7 Press {SET}.
DELETED
u
Example: Bob
0123456
LTo erase other entries, repeat steps 5 to 7.
8 Press {STOP} to exit the program.
Sending the same document to pre-programmed parties
{BROADCAST}
FACEDOWN
{+}
{MANUAL BROAD} {>} {STOP}
{SCAN}
{RESOLUTION}
{FAX START} {SET}
1 Insert the document FACE DOWN into the feeder.
LConfirm that there are no documents on the scanner glass.
LIf necessary, press {RESOLUTION} repeatedly to select the desired setting (page 32).
2 Press the desired {BROADCAST}
{MANUAL BROAD}.
LYou can also use the navigator key. Press {>}, then press {+} or
Example: <BROADCAST1>
EDIT:PRESS MENU
b
<BROADCAST1>
SEND:PRESS SET
LThe document will be fed into the unit and scanned into memory. The unit will then transmit the data to each entry, calling each number sequentially.
LAfter transmission, the stored document will be erased automatically, and the unit will automatically print a broadcast sending report.
Note:
LDo not open the document cover when sending a fax with the auto document feeder.
LIf you select the “FINE”, “SUPER FINE” or “PHOTO” resolution, the number of pages that the unit can transmit will decrease.
LIf the document exceeds the memory capacity (page 85), sending will be cancelled.
LIf one of the entries is busy or does not answer, it will be skipped. All skipped entries will be redialled up to 5 times after all of the other entries have been called.
To send the same document using the scanner glass
LConfirm that there are no documents in the auto document feeder.
1.Open the document cover.
2.Place the document FACE DOWN, then close the document cover.
3.Press the desired {BROADCAST}
{MANUAL BROAD}.
L To send a single page, skip to step 6. L To send multiple pages, go to the next
step.
4.Place the next page.
5.Press {SCAN}.
LTo send more pages, repeat steps 4 and 5.
6.Press {FAX START}.
- 40 -