Remote Operation (KX-FP185/KX-FM189 only)
Operating from a remote location!
The following operations can be performed from a remote location using a touch tone telephone.
Program the remote operation ID (feature #11 on page 66) and set the unit to the TAD/FAX mode before going out (p. 52).
Dial key | Remote command | Page |
| Dial key | Remote command | Page | |
|
|
|
|
|
|
|
|
0 | Skips the greeting message | 61 |
|
| 9 | Stops | 61 |
|
|
|
|
|
| message |
|
1 | Repeats a message | 60 |
|
| 4 | Erases a specific message | 61 |
|
|
|
|
|
|
|
|
|
|
|
|
| 5 | Erases all messages | 61 |
2 | Skips a message | 60 |
|
| |||
|
|
|
|
| |||
|
|
|
| 8 | 0 | Changes to the TEL mode | 61 |
4 | New message playback | 60 |
| ||||
|
|
|
|
| |||
| 8 | 1 | Turns ON message transfer | 61 | |||
|
|
|
| ||||
5 | All message playback | 60 |
| ||||
|
|
|
|
| |||
| 8 | 2 | Turns OFF message transfer | 61 | |||
|
|
|
| ||||
7 | 61 |
|
|
|
|
| |
| 8 | 3 | Turns ON pager call | 61 | |||
|
|
|
| ||||
8 | Continues operation | See |
|
|
|
|
|
| 8 | 4 | Turns OFF pager call | 61 | |||
note |
| ||||||
|
|
|
|
|
|
|
|
Note:
●During remote operation, the unit will stop and two beeps will be heard in the following conditions:
—2 minutes 40 seconds after your unit answered.
—Every 2 minutes 40 seconds after pressing any command key.
To listen to further messages, press 8 within 10 seconds after hearing the two beeps.
Remote operation card
Please cut out and carry this card for assistance when using the remote operation.
Answering Device Remote Operation
Notice of Remote Operation
1.Call your unit.
2.Enter the remote operation ID
during the greeting message.
●The new messages will be played automatically.
●If there are no new messages, wait for 4 seconds. All the messages will be played back.
3.Press the remote command key(s) within 10 seconds (see the reverse side).
Fold here
●The remote operation is available only from a touch tone telephone when the unit is in the TAD/FAX mode.
●When the unit is in the TEL mode, call your unit and wait for 10 rings. Enter the remote operation ID within 8 seconds and wait for 3 seconds. The unit will switch to the TAD/FAX mode.
●When you press a key, press firmly.
●To send a document, press
9 . When a fax tone is heard, start transmission.
59
