84

Ink Film

4Remove the stoppers and tags from the new
ink film. Find the “T” shaped gear (blue).
Tags
New ink film
“T” shaped gear (blue) Stopper
Stopper
5Insert the blue core of the front ink film roll
into the right slot of the unit ( ). Insert the
“T” shaped gear (blue) into the left slot of the
unit ( ).
Insert the back ink film roll ( ).
3
2
1
2
Right
slot
Blue core
1
3
“T” shaped
gear (blue)
Left
slot
Back ink film roll
Front ink
film roll
6If the ink film is slack, tighten it by winding
the gear.
Gear
Ink film
Note:
The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
Incorrect Correct
Tight
7Close the back cover securely by pushing
down on the dotted area at both ends ( ).
Close the front cover securely ( ).
The following message will be displayed
while the unit is checking that there is no
slack on the ink film.
Display: PLEASE WAIT
2
1
Dotted area
Front cover
Display
Back cover
1
2